Jitai Valve Group Co., Ltd.

Introduction

Carbon steel pressure seal gate valves are rigidly engineered for demanding conditions in sectors of power plant, refinery, oil & gas ,etc.

Feature

1.Unobstructed flow channel and reduced energy loss;

2.Pressure seal self-tightening bonnet; 

3.Stellite overlaid sealing face with superb wear resistance;

4.Rugged stem after quenching, tempering and nitriding;

5.Single wedge, double wedge and parallel side wedge;

6.Bypass valves for pressure relief

Scope

Nominal size: 2"~24"(DN50~DN600）

Nominal pressure: Class 900~Class 4500（PN160~PN420）

Standard: ASME B16.34

Body material：WCA, WCB, WCC, A105

End connection： BW, RTJ, RF,

Operation：Manual, Pneumatic, Electric, Hydraulic

Certificate

Jitai Valve has acquired numerous certificates to assure our customers of creditable reliability, including 

Maintenance 

1. Pay attention to the storage environment of the valve. It should be stored in a dry and ventilated room, and both ends of the passage should be blocked.

2. The valve should be inspected regularly, and the dirt on it should be removed, and anti-rust oil should be applied to its surface.

3. The valve after installation and application should be checked and repaired regularly to ensure its normal operation.

4. Check whether the sealing surface of the valve is worn or not, and repair or replace it according to the situation.

5. The sealing performance of the valve should be tested to ensure its performance.

7. The valve in operation should be intact, the bolts on the flange and bracket are complete, the threads are not damaged, and there is no looseness.

8. The packing gland is not allowed to be skewed or have no pre-tightening gap.

http://www.jitaivalvegroups.com/